Hi all !!
The default movie player for fedora 10 is Totem movie player. You can use it to play mp3. All you need is to install a codec. Install the codec "gstreamer-plugins-ugly" by the command:
yum install gstreamer-plugins-ugly
Now enjoy mp3 in fedora 10.
Showing posts with label fedora. Show all posts
Showing posts with label fedora. Show all posts
Tuesday, April 20, 2010
Saturday, June 13, 2009
Setting up GP internet connection via bluetooth in Fedora Core 10
I am going to describe below how I managed to setup/configure Grameen phone wireless internet connection in Linux Fedora Core 10 using bluetooth modem.
1)Got the mac id by writing this command in terminal
hcitool scan
2)got the channel num from terminal by typing
sdptool search DUN
mine was channel 1
3)then I edited /etc/bluetooth/rfcomm.conf in this way
rfcomm0 {
bind yes;
device 00:21:08:75:6C:CD;
channel 1;
comment "Bluetooth PPP Connection";
}
device and channel are the values I found in step 1 & 2
Thats the end of configuration.
Now I need to dial. I dialed using a dialer . There are other ways as well.
First I created the dialer
4) I went to system->administration->network
went to hardware tab, chose new,
then modem device: /dev/rfcomm0
baud rate: 460800
that created the modem.
5) then I chose edit
chose the following tab and did this:
provider ->phone number: *99***1#
advanced->modem initialization string :\rAT OK 'AT+CGDCONT=1,"IP","gpinternet"' OK ATD*99***1# CONNECT"
Now the dialer should be ready.
Then I went to terminal and wrote:
6)rfcomm connect 00:21:08:75:6C:CD
it gave me msg : rfcomm connect 00:21:08:75:6C:CD
7)from system->administration->network i chose the newly created modem. and chose activate.
It connected me to the internet.
hope this helps you. I might have missed something. But this should work. There might be easier ways. But this is how I could connect after trying several ways.
Have fun :))
1)Got the mac id by writing this command in terminal
hcitool scan
2)got the channel num from terminal by typing
sdptool search DUN
mine was channel 1
3)then I edited /etc/bluetooth/rfcomm.conf in this way
rfcomm0 {
bind yes;
device 00:21:08:75:6C:CD;
channel 1;
comment "Bluetooth PPP Connection";
}
device and channel are the values I found in step 1 & 2
Thats the end of configuration.
Now I need to dial. I dialed using a dialer . There are other ways as well.
First I created the dialer
4) I went to system->administration->network
went to hardware tab, chose new,
then modem device: /dev/rfcomm0
baud rate: 460800
that created the modem.
5) then I chose edit
chose the following tab and did this:
provider ->phone number: *99***1#
advanced->modem initialization string :\rAT OK 'AT+CGDCONT=1,"IP","gpinternet"' OK ATD*99***1# CONNECT"
Now the dialer should be ready.
Then I went to terminal and wrote:
6)rfcomm connect 00:21:08:75:6C:CD
it gave me msg : rfcomm connect 00:21:08:75:6C:CD
7)from system->administration->network i chose the newly created modem. and chose activate.
It connected me to the internet.
hope this helps you. I might have missed something. But this should work. There might be easier ways. But this is how I could connect after trying several ways.
Have fun :))
Subscribe to:
Posts (Atom)